Page 104 - Demo

exmweb.com | 1-800-363-2423 | [email protected] 12-13 MTRX CABINETSSOLID CLOSURE PLATE726500 MXCESPThe 6500 MXCESP solid closure plates are used to seal the top and bottom of a cable entry cabinet. They are made of steel and are finished with RAL7035 textured gray powder coating.CATALOG NUMBERThe 6500 MXCEDP closure plates with DIN cut-outs are used to seal the top and bottom of a cable entry cabinet. The 24-pin cut-outs can be sealed or adapted using the adaptors below. They are made of steel and are finished with RAL7035 textured gray powder coating.FITS CABLE ENTRY CABINETS WITH A DEPTH OFThe 6500 MXCEAP are used with 6500 MXCEDP cable entry closing plates to seal unused cut-outs or to adapt to different cut-out sizes. They are made of steel and are finished with RAL7035 textured gray powder coating.CATALOG NUMBER6500 MXCEDP04 400mm 6500 MXCEDP05 500mm 6500 MXCEDP06 600mm 6500 MXCEDP08 800mm 6500 MXCEDP09 900mmFITS CABLE ENTRY CABINETS WITH A DEPTH OF6500 MXCESP04 400mm 6500 MXCESP05 500mm 6500 MXCESP06 600mm 6500 MXCESP08 800mm 6500 MXCESP09 900mmADAPTS FROM 24 PIN CUT-OUT TOCATALOG NUMBER6500 MXCEAP00 Blank cover 6500 MXCEAP16 16 pin cut-out 6500 MXCEAP10 10 pin cut-out 6500 MXCEAP06 6 pin cut-outThe 6500 MXCEPL are installed under cable entry cabinets. They are made of steel. The 6500 MXCEPL consists of four plinth blocks, four plinth panels and all installation hardware. The plinths are finished with heat fused polyester powder. The finish is RAL7011 sandtex dark gray.CATALOG NUMBERFITS CABLE ENTRY CABINETS WITH A WIDTH OF6500 MXCEPL04 400mm 6500 MXCEPL05 500mm 6500 MXCEPL06 600mm 6500 MXCEPL08 800mm 6500 MXCEPL09 900mmCLOSURE PLATE WITH DIN CUT-OUTCLOSURE PLATE ADAPTERSBASE PLINTHS FOR CABLE ENTRY CABINETS