The 5500 MD multi-door, oil and dust tight enclosures are used indoors for protection against dirt, dust and oil. The boxes are made of high quality code gauge steel, with all seams continuously welded. Body stiffeners are provided to increase rigidity. Sets of double doors and single doors are separated by center posts. The double doors do not have a center post, but the left hand door is flanged and the oil tight stainless steel padlockable handle is on the right hand door. The single doors also have padlockable handles and the hinges are on the left. A high quality, robotically poured in place gasket ensures a complete and durable oil and dust tight seal. The heavy duty die cast hinges have captive hinge pins which permit 180° door opening. The three door enclosures have one set of double doors with a 78”X70” inner panel and one single door with a 78”X34” inner panel. The four door enclosures have two sets of double doors with two 78”X70” inner panels. The 5 door enclosures have two sets of double doors with two 78”X70” inner panels and one single door with a 78”X34” inner panel. An interlock is installed to ensure that the left hand doors (slaves) can only be opened if the right hand door (master) is open. The inner panels are made of galvanized steel and mount on M10 welded studs. Lifting eyebolts and provisions for mounting lights are provided. The mechanical interlock mechanism uses the right hand door as the master and allows users to close the doors in any order. A print pocket is also provided. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is ANSI/ASA 61 smooth gray.

CSA Certified / UL Listed NEMA/EEMAC 12-13 / IP55