COMMERCIAL

CLIMATE CONTROL

ACCESSORIES

BOXCAD

Air Conditioner

Mechanical Hygrostat

01220.0-00

CA$255.28

In Stock

Added to Saved List

See your favorite product on Saved List

The MFR 012 electromechanical hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

¹ The MFR 012 can also be used to control cooling fans, warning lights or other devices.
¹ The critical relative humidity level for most components is 65%. Above 65% RH, condensation can form and cause malfunctions of electronic equipment. Long term, this can lead to corrosion and permanent damage of electronic components and systems.

  • Switching difference 4% RH (± 3% tolerance) – at 50% RH
  • Permissible air velocity 50 ft/sec (15m/s)
  • Contact type SPDT / change-over contact
  • Service life > 50,000 cycles
  • Min. Switching capacity 100mA @ AC/DC 20V
  • Max. Switching capacity 5 A resistive @ AC 250 V
  • DC 20W
  • Connection 3-pole terminal, clamping torque 0.5Nm max. Solid wire – AWG 14 max. (2.5mm²) stranded wire¹ – AWG 16 max. (1.5 mm²) (1.5mm²)
  • Housing plastic, UL 94V-0, light grey
  • Mounting clip for 35mm DIN rail, EN 60715
  • Mounting position vertical
  • Operating / Storage temperature 32 to 140 °F (0 to 60 °C) / -40 to 140 °F (-40 to 60 °C)
  • Operating / Storage humidity max. 95 %RH (non-condensing)
  • Dimensions 2.64 x 1.97 x 1.5” (67 x 50 x 38mm)
  • Weight approx. 2 oz. (60g)
  • Protection type IP20
  • Approvals UL File No. 164102, GOST-R

Related Products

    Your Cart
    Your cart is emptyReturn to Home