ACCESSORIES
Complement your enclosure with a wide variety of added features

Chris James

Drip Shield Enclosure (bolted feet)

The 5412 ESSMDS is designed for applications where the enclosure needs to be installed upside down, with the back of the enclosure mounted to the ceiling. The 5412 ESSMUD are made of high quality 16 GA (Type 304) stainless steel, with continuously welded corner seams. A high quality, robotically poured-in-place, seamless gasket ensures a complete and durable water tight seal. EXM's exclusive ¼ turn locking system ensures positive closing. Each enclosure comes complete with a 14 GA galvanized inner panel, which mounts on welded nuts.

Upside Down Enclosure (welded feet)

The 5412 ESSMUD is designed for applications where the enclosure needs to be installed upside down, with the back of the enclosure mounted to the ceiling. The 5412 ESSMUD are made of high quality 16 GA (Type 304) stainless steel, with continuously welded corner seams. A high quality, robotically poured-in-place, seamless gasket ensures a complete and durable water tight seal. EXM's exclusive ¼ turn locking system ensures positive closing. Each enclosure comes complete with a 14 GA galvanized inner panel, which mounts on welded nuts.

Double Door Stainless Steel Quarter Turn Cover

The 5412 ESSQTDD are made of high quality code gauge (type 304) stainless steel with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Inner panel is optional, which mounts on welded M10 studs.

Stainless Steel Freestanding double Door, Inner Panel on Studs

The 9412 STSSDD are made of high quality code gauge (type 304) stainless steel with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Inner panel is optional, which mounts on welded M10 studs.

Stainless Steel Freestanding Single Door, Inner Panel on Studs

The 9412 STSS are made of high quality code gauge (type 304) stainless steel with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Inner panel is optional, which mounts on welded M10 studs.

Stainless Steel Freestanding Double Door With Handle

The 5412 SSDDH are made of high quality code gauge (type 304) stainless steel, with continuously welded corner seams. The center post is removable to facilitate the installation of the inner panel. Each enclosure comes complete with a galvanized inner panel. 

Freestanding Double Door, Inner Panel on Studs

The 9412 STDD is a floor mounted enclosure used for protection against dust, dirt or oil splashing. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Enclosure is finished with polyester powder paint. Inner panel is optional, which mounts on welded M10 studs.

Freestanding Single Door, Inner Panel on Studs

The 9412 ST is a floor mounted enclosure used for protection against dust, dirt or oil splashing. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Enclosure is finished with polyester powder paint. Inner panel is optional, which mounts on welded M10 studs.

Freestanding Double Door, Inner Panel on Studs

The 9500 STDD is a floor mounted enclosure used for protection against dust, dirt or oil splashing. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Enclosure is finished with polyester powder paint. Inner panel is optional, which mounts on welded M10 studs.

Freestanding Single Door, Inner Panel on Studs

The 9500 ST is a floor mounted enclosure used for protection against dust, dirt or oil splashing. A quality seamless gasket ensures a complete and durable seal. The door features an automotive locking handle ensuring a smooth and secure 3-point latching system. Enclosure is finished with polyester powder paint. Inner panel is optional, which mounts on welded M10 studs.

Page 1 of 96